{"id":1384,"date":"2013-03-19T01:43:41","date_gmt":"2013-03-19T01:43:41","guid":{"rendered":"http:\/\/thunderofwade.com\/blog\/?p=1384"},"modified":"2013-03-19T01:43:41","modified_gmt":"2013-03-19T01:43:41","slug":"sump-pump-iii-the-resolution","status":"publish","type":"post","link":"https:\/\/thunderofwade.com\/blog\/2013\/03\/19\/sump-pump-iii-the-resolution\/","title":{"rendered":"Sump Pump III: The Resolution"},"content":{"rendered":"<p>With all the tools ready, it was time to bite the bullet and make the first cut. As soon as the saw cut through the pipe wall, a flood of extra filthy water rushed out. I stuck it out and finished the cut. The lower part of the pipe, still attached to the old sump pump, lifted out easily and I got it drained. Once it was on the work bench, my faithful assistant Jim and I locked onto the pipe with the pipe wrench and&#8230;<\/p>\n<p>&#8230;it turned easily. In moment, the pipe was loose and then free.<\/p>\n<p>We took a closer look at the pipe and saw that a threaded one way value assembly had been attached to the pipe. I couldn&#8217;t have removed the pipe since it was all one piece and what I&#8217;d thought was a sliding coupler was fixed in place. \u00a0Easy enough to see now that I wasn&#8217;t upside down with my head in a hole of full of dirty water.<\/p>\n<p>I got the pipe cleaned up, took the old sump pump outside (banished it, really), and measured the connector piece to determine how much to cut off. My assistant and I had some trouble with this one, but finally made a decision and I got the pipe cut. A little seal tape on the threaded end and the lower pipe was on the shiny new pump. And the careful use of a screw-driver had the connector on the other end.<\/p>\n<p>This time I was able to use a bucket to bail out some more water, then lowered the pump in and with some swearing I was able to force the connector in place. The screws on the 0-clamps were tightened, more water was added (just in case), and pump was plugged in.<\/p>\n<p>The pumped kicked on and in moments, the water level in the sump was lowered back to normal. I watched as the water trickled back in and marveled as the pump kicked back on to take care of that once the float had risen high enough.<\/p>\n<p>No leaks, nothing broke, no flood. It was, in a word, success.<\/p>\n<p>BUT AT WHAT COST!?!!?<\/p>\n<p>Well, about $127 for the sump pump, $10 for the connector, and about $20 for the wrench and saw.<\/p>\n<p>I put the cover back on, but didn&#8217;t put the lattice up yet &#8211; just in case. (I do that a lot, don&#8217;t I?) The bathroom took a while to clean, but once the floor is dry it will be back to normal.<\/p>\n<p>I sort of expected to have a flash of light and a shower of coins once I leveled up in my plumbing skills, but I just fixed some tea and settled in for the night.<\/p>\n<p>I&#8217;ll check this again before I go to bed, but I&#8217;m pretty confident that everything is okay. If it wasn&#8217;t official before, it is now.<\/p>\n<p>I&#8217;m a homeowner.<\/p>\n","protected":false},"excerpt":{"rendered":"<p>With all the tools ready, it was time to bite the bullet and make the first cut. As soon as the saw cut through the pipe wall, a flood of extra filthy water rushed out. I stuck it out and finished the cut. The lower part of the pipe, still attached to the old sump [&hellip;]<\/p>\n","protected":false},"author":2,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_exactmetrics_skip_tracking":false,"_exactmetrics_sitenote_active":false,"_exactmetrics_sitenote_note":"","_exactmetrics_sitenote_category":0,"_bluesky_dont_syndicate":"","_bluesky_syndication_accounts":"","_bluesky_syndication_text":"","footnotes":""},"categories":[1],"tags":[],"class_list":["post-1384","post","type-post","status-publish","format-standard","hentry","category-uncategorized"],"amp_enabled":true,"_links":{"self":[{"href":"https:\/\/thunderofwade.com\/blog\/wp-json\/wp\/v2\/posts\/1384","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/thunderofwade.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/thunderofwade.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/thunderofwade.com\/blog\/wp-json\/wp\/v2\/users\/2"}],"replies":[{"embeddable":true,"href":"https:\/\/thunderofwade.com\/blog\/wp-json\/wp\/v2\/comments?post=1384"}],"version-history":[{"count":1,"href":"https:\/\/thunderofwade.com\/blog\/wp-json\/wp\/v2\/posts\/1384\/revisions"}],"predecessor-version":[{"id":1385,"href":"https:\/\/thunderofwade.com\/blog\/wp-json\/wp\/v2\/posts\/1384\/revisions\/1385"}],"wp:attachment":[{"href":"https:\/\/thunderofwade.com\/blog\/wp-json\/wp\/v2\/media?parent=1384"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/thunderofwade.com\/blog\/wp-json\/wp\/v2\/categories?post=1384"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/thunderofwade.com\/blog\/wp-json\/wp\/v2\/tags?post=1384"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}